Survey of large circular and octagonal tanks operated at Norwegian commercial smolt and post-smolt sites

AbstractA survey was conducted to determine the geometry, operating parameters, and other key features of large circular or octagonal culture tanks used to produce Atlantic salmon smolt and post-smolt at six major Norwegian Atlantic salmon production companies. A total of 55 large tanks were reported at seven land-based hatchery locations, i.e., averaging 7.9 (range of 4–12) large tanks per land-based site. In addition, one 21,000m3 floating fiberglass tank in sea was reported. Culture volume ranged from 500 to 1300m3 for each land-based tank. Most tanks were circular, but one site used octagonal tanks. Land-based tank diameters ranged from 14.5 to 20m diameter, whereas the floating tank was 40m diameter. Maximum tank depths ranged from 3.5 to 4.5m at land-based facilities, which produced diameter-to-average-depth ratios of 3.6:1 to 5.5:1m:m. The floating tank was much deeper at 20m, with a diameter-to-average-depth ratio of only 2.4:1m:m. All land-based tanks had floors sloping at 4.0–6.5% toward the tank center and various pipe configurations that penetrated the culture tank water volume at tank center. These pipes and sloping floors were used to reduce labor when removing dead fish and harvesting fish.Maximum flow ranged from 3 to 19m3/min per land-based tank, with 400m3/min at the floating tank, but tank flow was adjustable at most facilities. Land-based tanks were flushed at a mean hydraulic retention time (HRT) of 35–170min. Maximum feed load on each land-based tank ranged from 525 to 850kg/day, but the floating tank reached 3700kg/day. Almost half of the large tanks reported in this survey were installed or renovated since 2013, including the three tank systems with the highest flow rate per tank (greater than 17.6m3/min). These more recent tanks were operated at more rapid tank HRT’s, i.e., from 34.8 to 52.5min, than the 67–170min HRT typical of the large tanks built before 2013. In addition, flow per unit of feed load in land-based tanks that began operating before 2010 were lower (19–30m3 flow/kg feed) than in tanks that began operating later (33–40m3 flow/kg feed). In comparison, the floating tank operates at a maximum daily tank flow to feed load of 160m3 flow/kg feed, which is the least intensive of all tanks surveyed. Survey results suggest that the recently built tanks have been designed to operate at a reduced metabolic loading per unit of flow, a tendency that would improve water quality throughout the culture tank, all else equal. This trend is possible due to the ever increasing application of water recirculating systems

Il prodotto lordo nei comprensori piemontesi nel decennio 1971-1981

Working Paper; n. 47- Indice #5- Il prodotto lordo per comprensori: 1971-1981 #8- Appendice metodologica #23- Appendice statistica #3

Regge description of two pseudoscalar meson production in antiproton-proton annihilation

A Regge-inspired model is used to discuss the hard exclusive two-body hadronic reactions (pbar p ----> pi+ pi-, pi0 pi0, K+ K-, Kbar0 K0) for the FAIR facility project at GSI with the Panda detector. The comparison between the differential cross sections predictions and the available data is shown to determine the values of the few parameters of the model.Comment: 9 pages, 13 figure

Aging Studies for the Large Honeycomb Drift Tube System of the Outer Tracker of HERA-B

The HERA-B Outer Tracker consists of drift tubes folded from polycarbonate foil and is operated with Ar/CF4/CO2 as drift gas. The detector has to stand radiation levels which are similar to LHC conditions. The first prototypes exposed to radiation in HERA-B suffered severe radiation damage due to the development of self-sustaining currents (Malter effect). In a subsequent extended R&D program major changes to the original concept for the drift tubes (surface conductivity, drift gas, production materials) have been developed and validated for use in harsh radiation environments. In the test program various aging effects (like Malter currents, gain loss due to anode aging and etching of the anode gold surface) have been observed and cures by tuning of operation parameters have been developed.Comment: 14 pages, 6 figures, to be published in the Proceedings of the International Workshop On Aging Phenomena In Gaseous Detectors, 2-5 Oct 2001, Hamburg, German

The Outer Tracker Detector of the HERA-B Experiment Part I: Detector

The HERA-B Outer Tracker is a large system of planar drift chambers with about 113000 read-out channels. Its inner part has been designed to be exposed to a particle flux of up to 2.10^5 cm^-2 s^-1, thus coping with conditions similar to those expected for future hadron collider experiments. 13 superlayers, each consisting of two individual chambers, have been assembled and installed in the experiment. The stereo layers inside each chamber are composed of honeycomb drift tube modules with 5 and 10 mm diameter cells. Chamber aging is prevented by coating the cathode foils with thin layers of copper and gold, together with a proper drift gas choice. Longitudinal wire segmentation is used to limit the occupancy in the most irradiated detector regions to about 20 %. The production of 978 modules was distributed among six different laboratories and took 15 months. For all materials in the fiducial region of the detector good compromises of stability versus thickness were found. A closed-loop gas system supplies the Ar/CF4/CO2 gas mixture to all chambers. The successful operation of the HERA-B Outer Tracker shows that a large tracker can be efficiently built and safely operated under huge radiation load at a hadron collider.Comment: 28 pages, 14 figure

Open and Hidden Charm Production in 920 GeV Proton-Nucleus Collisions

The HERA-B collaboration has studied the production of charmonium and open charm states in collisions of 920 GeV protons with wire targets of different materials. The acceptance of the HERA-B spectrometer covers negative values of xF up to xF=-0.3 and a broad range in transverse momentum from 0.0 to 4.8 GeV/c. The studies presented in this paper include J/psi differential distributions and the suppression of J/psi production in nuclear media. Furthermore, production cross sections and cross section ratios for open charm mesons are discussed.Comment: 5 pages, 9 figures, to be published in the proceedings of the 6th International Conference on Hyperons, Charm & Beauty Hadrons (BEACH04), Chicago, IL, June 27 - July 3, 200

The Outer Tracker Detector of the HERA-B Experiment. Part II: Front-End Electronics

The HERA-B Outer Tracker is a large detector with 112674 drift chamber channels. It is exposed to a particle flux of up to 2x10^5/cm^2/s thus coping with conditions similar to those expected for the LHC experiments. The front-end readout system, based on the ASD-8 chip and a customized TDC chip, is designed to fulfil the requirements on low noise, high sensitivity, rate tolerance, and high integration density. The TDC system is based on an ASIC which digitizes the time in bins of about 0.5 ns within a total of 256 bins. The chip also comprises a pipeline to store data from 128 events which is required for a deadtime-free trigger and data acquisition system. We report on the development, installation, and commissioning of the front-end electronics, including the grounding and noise suppression schemes, and discuss its performance in the HERA-B experiment

Backward pion-nucleon scattering

A global analysis of the world data on differential cross sections and polarization asymmetries of backward pion-nucleon scattering for invariant collision energies above 3 GeV is performed in a Regge model. Including the $N_\alpha$, $N_\gamma$, $\Delta_\delta$ and $\Delta_\beta$ trajectories, we reproduce both angular distributions and polarization data for small values of the Mandelstam variable $u$, in contrast to previous analyses. The model amplitude is used to obtain evidence for baryon resonances with mass below 3 GeV. Our analysis suggests a $G_{39}$ resonance with a mass of 2.83 GeV as member of the $\Delta_{\beta}$ trajectory from the corresponding Chew-Frautschi plot.Comment: 12 pages, 16 figure

Search for the Flavor-Changing Neutral Current Decay D0→μ+μ−D^0 \to \mu^+\mu^- with the HERA-B Detector

We report on a search for the flavor-changing neutral current decay $D^0 \to \mu^+\mu^-$ using $50 \times 10^6$ events recorded with a dimuon trigger in interactions of 920 GeV protons with nuclei by the HERA-B experiment. We find no evidence for such decays and set a 90% confidence level upper limit on the branching fraction $Br(D^0 \to \mu^+\mu^-) <2.0 \times 10^{-6}$.Comment: 17 pages, 4 figures (of which 1 double), paper to be submitted to Physics Letters

Measurement of the J/Psi Production Cross Section in 920 GeV/c Fixed-Target Proton-Nucleus Interactions

The mid-rapidity (dsigma_(pN)/dy at y=0) and total sigma_(pN) production cross sections of J/Psi mesons are measured in proton-nucleus interactions. Data collected by the HERA-B experiment in interactions of 920 GeV/c protons with carbon, titanium and tungsten targets are used for this analysis. The J/Psi mesons are reconstructed by their decay into lepton pairs. The total production cross section obtained is sigma_(pN)(J/Psi) = 663 +- 74 +- 46 nb/nucleon. In addition, our result is compared with previous measurements